Lynnwood sprinkler repair
We find what's actually broken, show you the price, and test every zone before we leave.
Broken heads, leaking valves, dry spots and zones that won't turn on, fixed by our own crew out of Lynnwood.
Leave your name and number. Danny calls you back to set a time.
Prefer to talk? Call (425) 648-9443
Sprinkler repair means finding and fixing the part of your irrigation system that has stopped working: a broken head, a stuck valve, a cracked line, a failed controller or a cut wire. Grizzly repairs residential sprinkler and drip systems in Lynnwood and across Snohomish and King County, including systems another company installed. We test the system first, give you a written price, and retest every zone after the repair.
Every repair visit
No matter how small the problem looks, every repair follows the same four checks.
We check your water pressure first, because low pressure can look like a broken head.
We run each zone and watch every head, and test valves, solenoids and wiring with a meter.
We show you what we found and the price before any repair starts.
After the fix, we run the whole system again. If anything else is off, you know before we leave.
What we fix
Broken, clogged, sunken or crooked heads replaced or adjusted so every head covers its area.
→ Mower and snow damage
→ Heads that won't pop up
→ Misting or spraying sideways
Stuck or leaking valves rebuilt, dead solenoids replaced, and lost valve boxes found without tearing up the yard.
→ Zone won't turn on or off
→ Soggy spot by the valve box
→ Buried valve locating
Cracked laterals and mainlines found and repaired properly, not patched with tape.
→ Freeze-cracked pipe
→ Root and shovel damage
→ Failed fittings
Programming, power and timer failures diagnosed and fixed, plus smart controller setup.
→ Blank or reset controller
→ Wrong seasonal schedule
→ Rain and freeze sensors
Cut, corroded or shorted valve wiring traced and repaired so every zone answers the controller.
→ One zone dead, others fine
→ Wire cut by digging
→ Corroded splices
Hidden leaks traced to the exact spot before we dig, so we only open the ground where the problem is.
→ Water bill jumped
→ Water bubbling in the lawn
→ Low pressure on one zone
What goes wrong
Most problems show up in the lawn before anywhere else. Here's what each sign usually means.
Usually: a clogged or sunken head, or a head with the wrong nozzle for its zone.
Usually: a cracked line or a leaking valve under the wet area.
Usually: a bad solenoid, a cut wire or a controller fault.
Usually: debris stuck in the valve or a torn diaphragm.
Usually: a hidden underground leak running every cycle.
Usually: low pressure, a leak upstream, or too many heads on one zone.
Our approach
A dry patch can be a clogged head, a bad valve or a cracked pipe. They look the same from the surface. Here's the difference testing first makes.
1. Look at the brown spot and guess the cause
2. Dig where the problem seems to be
3. Replace the part that looks worst
4. Leave without running the other zones
Result: you pay for parts you didn't need, and the real fault is still there.
1. Run each zone and watch every head before touching anything
2. Test valves, solenoids and wiring with a meter
3. Check the controller and sensors, since a bad setting can look like a broken part
4. Show you what we found and the price, then fix it and retest every zone
Result: you pay for the real fix, once.
Timing
At Paine Field, the closest NOAA weather station to Lynnwood, the first frost arrives around November 17 in a typical year, and by October 31 in about one year in ten. Fix leaks and broken parts before then, because a cracked line full of water gets worse when it freezes.
April – September
Fix problems as soon as you see them. A leak running every cycle wastes water all summer.
October
Get repairs done and book your blowout so lines are empty before the first frost.
November – March
Lines stay drained. If you find damage, we note it and fix it at spring start-up.
Late March – April
Turn on after the last frost and test every zone. Freeze damage shows up here.
Oct 31
First frost in 1 year out of 10
Nov 17
First frost in a typical year
Mar 9
Last spring frost in a typical year
Source: NOAA NCEI 1991–2020 climate normals, Everett Paine Field (USW00024222). First and last 32°F nights. More about sprinkler winterization →
Why Grizzly
01
Every zone, valve and wire is checked before we recommend anything.
02
You see what's broken and what it costs before any work starts.
03
We repair lawn sprinklers and drip lines, including systems another company put in.
04
If a part is worn out, we tell you which makes more sense before we do either.
05
Nothing subcontracted. The people who diagnose it are the people who fix it.
06
We run the whole system after the repair, not just the zone we fixed.
How it works
01
Call or send the form. Tell us which zones aren't working; photos help.
02
Pressure test and a zone-by-zone check to find the real cause.
03
You approve the price, and our own crew makes the repair.
04
We run the whole system before we leave, and we're a call away for your fall blowout.
Reviews
★★★★★
"Danny worked on our broken irrigation pipe and a underground connector. He was efficient, on time, and got the job done cleanly. I would hire him again."
Anirban B. · Google review
★★★★★
"… Weeks after installation, I had an issue with one garden area getting oversaturated along with water build up so I called Danny and he came right over that same day and found that there was a faulty valve and he took care of it right away. Grizzly is competitively priced and Danny is very knowledgeable. …"
Ronald H. · Google review
★★★★★
"… He did a great job and was very thoughtful to not tear up the yard, and cleaned up the sidewalk as well. It turned out very nice! I appreciated the time he spent with me answering questions about my sprinkler system and other landscaping related questions I had. …"
Eric H. · Google review
Our guarantee
If a part we installed or a repair we made fails within 18 months, we come back and fix it. Every zone is retested before we leave, so most problems get caught on the day.
Where we work
From our base in Lynnwood, we repair sprinkler systems across Snohomish and King County. Near the edge of the map? Call and we'll tell you straight away.
Related services
Install, repair and replace the assembly that protects your drinking water.
Questions
Common signs are dry or brown spots, pooling water, heads that don't pop up, a zone that won't turn on or won't shut off, or a sudden jump in your water bill. Catching these early prevents bigger repairs later.
The most common causes are a bad valve solenoid, a damaged wire, a controller problem, or debris stuck in the valve. We test each part with a meter to find which one it is.
Heads usually fail from mower damage, dirt clogging the nozzle, worn seals, or heads that have sunk below the grass line. Most can be cleaned, raised or replaced.
A hidden leak in an underground line is the most likely cause. Look for soggy areas, sinking soil or unusually green patches. We trace the leak to the exact spot before we dig, so we only open the ground where the problem is.
Repair makes sense when the problem is isolated, like a broken head or one bad valve. Replacement makes sense when the system leaks constantly, has poor coverage or has outdated parts. We tell you which fits your system before we do either.
Yes. We repair lawn sprinklers and drip irrigation regardless of who installed them.
It depends on what's broken and where. We test the system, show you what we found, and give you a written price before any repair starts.
Yes. Grizzly Landscape & Construction LLC is registered with Washington L&I as contractor GRIZZLC755LL, and is bonded and insured. You can look the number up on L&I's Verify a Contractor tool.
Yes. Our irrigation work carries an 18-month warranty: if something we installed or repaired fails in that time, we come back and fix it.
In October. At Paine Field, the closest NOAA weather station to Lynnwood, the first frost comes around November 17 in a typical year and by October 31 in about one year in ten. Repairs first, then a blowout, so the lines are empty before it freezes.
Free consultation across Edmonds, Lynnwood and Mountlake Terrace, WA.